Right when I think there’s a light at the end of the tunnel, I am humbled by this.

This was a rust converter that Eastwood sells. After wire wheeling everything, I place this down in case I missed anything.

This is the paint that again Eastwood sell that goes on top of rust.

With a lot of hand sanding, I was able to get the fiber glass clean for painting.

For the paint I used Rust Oleum flat black.

Thought I would give the latches a little more color with an iron, aluminum, and flat black colored paint.

Click Here for Part 4

Part 1| Part 2| Part 3| Part 4